|
Install safely
When installing Tundra Grill® products into buildings, following fire safety instructions is essential. Here are some important aspects, which should be taken in consideration:
• The lower end of outer flue should extend to 30 cm downwards and at least 10 cm horizontally from the nearest flammable roof material. (See picture: chimney installation drawing)
• The length of the chimney depends on the slope and the height of the roof, but the distance between the top of the chimney and the nearest flammable roof material must be at least 80 cm.
• The outer flue included in the chimney set can only be used in buildings with no heat insulation or suspended ceilings. If Tundra Grill® is installed in buildings with heat insulation or suspended ceilings, a fire protected, made-to-measure bushing is needed.
• According to the fire protection instructions, non-inflammable material, such as concrete or protective metal sheet, should be placed under and around (50 cm) the fireplace.
• Take special care with open fire in indoor areas.
Install safely - PDF file (84 kb) »
|
|
|
 |